Refit a loose screw-on broom head
Refit a screw-on broom head that keeps coming loose. Clean and inspect both threads, start the handle squarely and test with short strokes.
- Estimated time
- 10 min
- Skill level
- Beginner
Before you start
Check that the head screws onto the handle. Push-fit and clip-on heads use different fixings. Set the broom on a stable surface and look for cracks around the socket. If the head came loose after a fall, inspect the handle end as well.
Tools and materials
- Dry cloth
- Soft brush
Step-by-step instructions
Unscrew the head
Hold the broom head steady and turn the handle gently until it comes free.
Check both threads
Brush away grit and look for cracks or flattened threads on the handle and socket.
Start the thread squarely
Line up the handle with the socket. Turn it backwards until the threads settle, then screw it in by hand.
Test with a few strokes
Sweep gently and check that the head stays firm without twisting.
Check the result
Hold the broom low and make a few short strokes. The head should stay lined up with the handle and should not turn when you change direction. If it comes loose again, compare the old handle and socket before buying a replacement.
Troubleshooting
If the handle still rocks when fully seated, match the damaged part with a compatible replacement.